Eryone Silk Pink PLA 3D Printer Filament 1.75mm, 1kg (2.2LBS) / Spool

Price: $45

.Highlight shiny silky smooth appearance; .Vacuumed Sealed With Desiccant; .1.75mm filament diameter; .1 kg (2.2 lbs) /spool; .Recommended Extrusion/Nozzle Temperature 190℃- 230℃

Hightlights

Hightlights

  Like silk, Highlight shiny silky smooth appearance.

  PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.

  1.75mm filament diameter (dimensional accuracy +/- 0.05mm).

  1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"

  Recommended Extrusion/Nozzle Temperature 190 - 230


Why Buy From ERYONE?
At ERYONE we pride ourselves on offering friendly service, advice, and support. Our staff is attentive and knowledgeable - we've been 3D printing for several years now and are happy to answer your 3D printing questions.
Have a question about the amazing capabilities ERYONE Series filament? No problem. Feel free to contact us.

Good to Know
1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.
2. In order to extend the life of your filament, please store it in a dry, sealed bag or box. Preferably, add a packet of Silca Gel to absorb any excess moisture.
3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly when you use it next time

 

Specs

Technical Specification
Diameter: 1.75mm
Tolerance: +/- 0.05mm
Print Temperature: 190-230℃

Recommended Print Speed: 30-60mm/s

FAQ

Download