Eryone Thinker, the world first smart 3D printer works with Alexa.
Eryone Thinker- The first smart 3D printer works with Amazon Alexa, built-in magnetic and flexible printing surface , compatible with auto leveling sensor, large volume and supper quiet.
Smart and remote control: Eryone Thinker is compatible with Amazon Alexa, Google Home and IFTTT. With those smart devices, you can monitor and remotely control your 3D printer, timing turn on or turn off it.
Magnetic and flexible printing surface: With many magnets built in aluminum plate, easily remove the printing surface from aluminum plate; The printing surface is combined from spring steel and PEI sheet, they are flexible, as a result, removing prints from the printing surface is pretty easy.
Supper quiet: We choose TMC2208 as stepper motor driver and quite fans, which dramatically decreases the noise and improve the printing quality as well. The average operational noise is 49dBA, working aside the 3D printer is not only a dream.
Assembly finished within 10 minutes: The base and gantry of this 3D printer have been pre-assembled, what you need to do is put those two parts together and wire a few interfaces.
Large Volume and high quality: The printing volume is 300*300*400mm, with carefully-selected components, after 3 steps installation, the printer will printing pretty well, almost no need to calibrate.
Power failure protection: Built-in supper capacitor and circuit designing, main board will store the height value of Z-axis after powered off. As a result, the printer can resume the print when the power is on again.
Compatible with Auto-leveling sensors: With pre-designed interface for BL-touch and proximity switch, update Eryone Thinker to auto-leveling function is relatively easy.
Shenzhen Eryone technology Co,. Ltd is a startup company established in June 2018, Eryone is devoted itself to make 3d printer is access to everyone and everywhere. With elegant appearance designing, carefully-selected components, preciously manufacturing, Eryone Thinker will work pretty good after slightly calibration, easy and professional.
Print technology: Fused Deposition Modeling
Build Volume: 300 x 300 x 400mm
Printing Precision: 0.05mm
Positioning precision: 12.5 μm / 12.5μm / 2.5μm
Nozzle diameter: 0.4mm
Printing Speed: 60-120mm/s
Travel speed: 30-200mm/s
Supported Software: Repetier-Host, Cura, simplify 3D
File types: STL
Supported OS: Windows / Mac / Linux
Nozzle temperature: Max 260℃
Heat bed temperature: Max 110℃
AC Input: 100-240V
DC Output: 24V/20.84A
Connectivity: Stand-alone SD card printing
Desktop space: 510*415*625mm
Shipping dimension: 660 x 580 x 256mm
Shipping weight: 16kg
Average operational noise: 49dBA
1 x 3D printer Thinker
1 x tool kit
1 x 8 GB SD card
1 x 10 meters