Thinker X400
LCD 3D Printer L10
Hyper Speed TPU
Standard TPU 90A Filament
Standard TPU 95A Filament
TPU Rainbow-95A
Ultra Silk PLA
Standard PLA
Silk Tri-color PLA
More
Standard PETG
PETG-GF
PETG-CF
Hyper Speed PETG
PA6/12-GF
Standard ASA
Hyper Speed ASA
ASA Glass Fiber
ASA Carbon Fiber
ABS Glass Fiber
ABS Carbon Fiber
Hpyer Speed ABS Filament
Water Washable Resin
Low Odor Resin
ABS Like Resin
🔥 ERYONE PPA-GF (25% Glass Fiber) – High-Performance 3D Printer Filament
📦 Product Overview
ERYONE PPA-GF is a glass-fiber reinforced polyphthalamide (PPA) filament, formulated with 25% short glass fibers – one of the highest loadings available in the FDM market.
This is not just another “high-temp nylon.” It’s a semi-aromatic polyamide that delivers exceptional stiffness, heat resistance, and dimensional stability, making it the go-to choice for functional prototypes, end-use parts, and industrial tooling.
🔧 Key Features – Why Choose ERYONE PPA-GF?
| Feature | Benefit |
|---|---|
| 25% Glass Fiber Reinforcement | Maximizes tensile strength and flexural modulus – outperforms most 15-20% GF competitors |
| Heat Deflection Temperature up to 198°C (after annealing) | Withstands high-temperature environments – ideal for automotive & industrial applications |
| Outstanding Flexural Strength (215.8 MPa) | Resists bending and deformation under heavy loads |
| High Impact Resistance (13.07 kJ/m²) | Tough enough for durable end-use parts |
| Compatible with 99% of 3D Printers | Works with Bambu Lab X1/P1, Prusa, Creality K1, and many more (≥280°C hotend required) |
| Low Warp, Easy to Print | Engineered for stable printing even without active heated chambers |
📊 Technical Specifications (vs. Competitor)
| Property | ERYONE PPA-GF (25% GF) | Competitor (15-20% GF) | Advantage |
|---|---|---|---|
| Tensile Strength (X-Y) | 129.77 MPa | 94 MPa | +38% |
| Elongation at Break (X-Y) | 3.84% | 2.70% | +42% |
| Flexural Strength | 215.80 MPa | 148 MPa | +46% |
| Flexural Modulus | 7212 MPa | 5000 MPa | +44% |
| Notched Impact Strength | 13.07 kJ/m² | 12.2 kJ/m² | +7% |
| HDT @ 0.45 MPa (annealed) | 198°C | 185°C | +13°C |
💡 Bottom Line: ERYONE PPA-GF delivers industry-leading XY strength and stiffness, with a heat tolerance that rivals injection-molded parts.
🏆 What Makes It a Game-Changer?
-
Best-in-Class Mechanical Performance – Higher glass fiber content (25%) means better stress transfer, higher critical fracture energy, and longer part life.
-
Heat Resistance That Competes with Metal – At 198°C HDT, it outperforms most engineering plastics, including standard PA6, PA66, and even some PBT grades.
-
No Printer Upgrade Needed – Designed to run on any printer with a 280-300°C hotend and hardened steel nozzle. No heated chamber required – though recommended for best results.
-
Consistent Quality – Every spool is precision-wound and vacuum-sealed to ensure reliable feeding and minimal moisture absorption.
🛠️ Recommended Print Settings
| Parameter | Value |
|---|---|
| Nozzle Temperature | 280 – 300°C |
| Bed Temperature | 100 – 110°C |
| Nozzle Material | Hardened steel or carbide (avoid brass) |
| Drying | Mandatory: 100°C for 4-6 hours before every print |
| Annealing | 80-100°C for 4-8 hours (improves heat resistance & strength) |
| Cooling Fan | Low or off |
| Bed Adhesion | Use glue stick or Magigoo for best hold |
🌍 Applications – Where to Use It
| Industry | Typical Parts |
|---|---|
| Automotive | Engine brackets, intake manifolds, sensor housings, fuel system components |
| Aerospace | Lightweight structural brackets, UAV frames, functional prototypes |
| Industrial Manufacturing | Jigs, fixtures, gears, bearing retainers, conveyor guides |
| Electronics | High-temp connectors, relay housings, heat sinks, coil formers |
| Prototyping | End-use part validation, extreme environment testing |
📌 Important Note – Don’t Skip Drying!
⚠️ PA-based materials are highly sensitive to moisture.
Even brief exposure to ambient air can cause bubbling, poor layer adhesion, and weak parts.
Always dry your filament at 100°C for 4-6 hours before printing – this single step makes the difference between a mediocre part and a production-grade component.
💬 What Our Customers Say
“I’ve tested PPA-GF from three brands – ERYONE’s 25% GF version is by far the stiffest and most heat-resistant. It prints beautifully on my Bambu X1C with zero warping.” – John D., USA
“Finally a filament that can replace metal brackets in my drone designs. Strong, light, and holds up to 180°C without deforming.” – Maria S., Germany
🔥 Ready to Upgrade Your Printing?
-
✅ Stronger than standard nylon
-
✅ More heat-resistant than PETG or ABS
-
✅ Tough enough for functional parts
Order ERYONE PPA-GF today and experience industrial-grade performance without the industrial price tag.