Firmware For 3D Printer

You can find the firmware for Eryone 3d printer at this section
Post Reply
User avatar
Eryone
Site Admin
Posts: 22
Joined: Wed May 08, 2019 10:50 am

Firmware For 3D Printer

Post by Eryone » Sat May 11, 2019 3:46 am

Hi,guys!
All the firmware for Eryone 3D printer are here.
You can choose the firwmare then download it.
--------------------------------------------------------------------------
--------------------------------------------------------------------------
Note:
1. Enabled the z axis babystep
2. Added the config for bltouch or npn sensor
3. Enabled the LCD info
Updated time:2019/5/11
4. Enabled the mesh bed leveling feature
5. Enabled the individual axis homing menu
6. Enabled the LCD status menu
Updated time:2019/11/6
1. Fixed some errors.
Updated time:2019/11/11
1. Fixed some errors.
Updated time:2019/12/03


Eryone Thinker 3d Printer
1.Stock Firmware
Version(2019/12/03):
Thinker series1203-Marlin1.1.9.zip
(3.38 MiB) Downloaded 18 times
Version(2019/11/11):
Thinker series1101-Marlin1.1.9.zip
(3.38 MiB) Downloaded 71 times
Version(2019/5/11):
Eryone thinker Marlin1.1.9.zip
(3.43 MiB) Downloaded 114 times



2.Firmware for Bltouch
Version for BltouchV3.1(2019/12/12):
Marlin1.1.9 for thinker bltouchv3.1.zip
(3.38 MiB) Downloaded 11 times

Version(2019/11/11):
Thinker series1101-Marlin1.1.9 bltouch.zip
(3.38 MiB) Downloaded 33 times
Old version(2019/5/11):
Marlin for 3dtouch and bltouch.zip
(3.51 MiB) Downloaded 97 times
Guide+Stl of the bltouch on Thinker:
For BltouchV3.1 with thinker/thinkerS
Guide:
https://youtu.be/fmzrUYbM1hQ
stl:
Eryone thinker bltouchV3.1 plate.zip
(10.17 KiB) Downloaded 17 times
Bltouch GuideV1.2.zip
(988.66 KiB) Downloaded 139 times


3.Firmware for Npn sensor
New version(2019/11/11):
Thinker series1101-Marlin1.1.9 npn.zip
(3.38 MiB) Downloaded 25 times
Old version(2019/5/11):
Marlin_NPN.zip
(3.44 MiB) Downloaded 69 times
Guide of the npn sensor on Thinker:
NPN sensor Guide for thinker.zip
(1 MiB) Downloaded 91 times
Download the correct firmware then upload it.
Refer to this post then upload it to your printer
:
viewtopic.php?f=6&t=9&p=9#p9


Eryone ThinkerV2 3d Printer
Note:
This section is for our beta plan users.
If your printer is thinker then don't upload it. This firmware is for thinker V2 3d printer


-------------------------------------------------------------------------------------------------------------------
-------------------------2019.9.10 Updated-------------------------------------------------------------------
Firmware for thinker V2 (Included the config for bltouch and NPN sensor)
Marlin_thinkerV2.zip
(3.52 MiB) Downloaded 45 times

clemfarfar
Posts: 7
Joined: Wed Dec 04, 2019 2:45 pm

Re: Firmware For 3D Printer

Post by clemfarfar » Wed Dec 04, 2019 2:47 pm

hello, have you planned a marlin 2.0 or 2.1?

William
Posts: 24
Joined: Fri May 10, 2019 3:40 pm

Re: Firmware For 3D Printer

Post by William » Fri Dec 06, 2019 3:51 am

clemfarfar wrote:
Wed Dec 04, 2019 2:47 pm
hello, have you planned a marlin 2.0 or 2.1?
Hi, thanks for your suggest!
We've got the info of the official Marlin2.0 is released.
So we will try to update the firmware to Marlin2.0.
Because Marlin2.0 changed a lot in the framework then we need to do a lot test.
When we fixed the most bugs then we will release the beta version.
;)

clemfarfar
Posts: 7
Joined: Wed Dec 04, 2019 2:45 pm

Re: Firmware For 3D Printer

Post by clemfarfar » Fri Dec 06, 2019 6:00 pm

thank's

be_st
Posts: 1
Joined: Wed Dec 11, 2019 4:09 pm

Re: Firmware For 3D Printer

Post by be_st » Thu Dec 12, 2019 7:20 pm

Hello,

so i have my new Thinker S 3D Printer. How can i check wich Version of Update i need?

Thanks Bernie
Eryone Thinker S

clemfarfar
Posts: 7
Joined: Wed Dec 04, 2019 2:45 pm

Re: Firmware For 3D Printer

Post by clemfarfar » Fri Dec 13, 2019 6:19 pm

hello be_st

info print / info print ;) you check version ;) :lol: I speak little english :mrgreen:

Post Reply