Firmware For 3D Printer

You can find the firmware for Eryone 3d printer at this section
Post Reply
User avatar
Eryone
Site Admin
Posts: 29
Joined: Wed May 08, 2019 6:50 pm

Firmware For 3D Printer

Post by Eryone » Sat May 11, 2019 11:46 am

Hi,guys!
All the firmware for Eryone 3D printer are here.
You can choose the firwmare then download it.
--------------------------------------------------------------------------
--------------------------------------------------------------------------
Note:
1. Enabled the z axis babystep
2. Added the config for bltouch or npn sensor
3. Enabled the LCD info
Updated time:2019/5/11
4. Enabled the mesh bed leveling feature
5. Enabled the individual axis homing menu
6. Enabled the LCD status menu
Updated time:2019/11/6
1. Fixed some errors.
Updated time:2019/11/11
1. Fixed some errors.
Updated time:2019/12/03
1. If you find your extruder won't work, please add the "M900 K0"
at the start code
Updated time:2019/12/27


Eryone Thinker 3d Printer
1.Stock Firmware
Version(2019/12/03):
Thinker series1203-Marlin1.1.9.zip
(3.38 MiB) Downloaded 77 times
Version(2019/11/11):
Thinker series1101-Marlin1.1.9.zip
(3.38 MiB) Downloaded 113 times
Version(2019/5/11):
Eryone thinker Marlin1.1.9.zip
(3.43 MiB) Downloaded 136 times



2.Firmware for Bltouch
Version for BltouchV3.1(2019/12/12):
Marlin1.1.9 for thinker bltouchv3.1.zip
(3.38 MiB) Downloaded 114 times

Version(2019/11/11):
Thinker series1101-Marlin1.1.9 bltouch.zip
(3.38 MiB) Downloaded 71 times
Old version(2019/5/11):
Marlin for 3dtouch and bltouch.zip
(3.51 MiB) Downloaded 113 times
Guide+Stl of the bltouch on Thinker:
For BltouchV3.1 with thinker/thinkerS
Guide:
https://youtu.be/fmzrUYbM1hQ
stl:
Eryone thinker bltouchV3.1 plate.zip
(10.17 KiB) Downloaded 79 times
Bltouch GuideV1.2.zip
(988.66 KiB) Downloaded 170 times


3.Firmware for Npn sensor
New version(2019/11/11):
Thinker series1101-Marlin1.1.9 npn.zip
(3.38 MiB) Downloaded 39 times
Old version(2019/5/11):
Marlin_NPN.zip
(3.44 MiB) Downloaded 81 times
Guide of the npn sensor on Thinker:
NPN sensor Guide for thinker.zip
(1 MiB) Downloaded 107 times
Download the correct firmware then upload it.
Refer to this post then upload it to your printer
:
viewtopic.php?f=6&t=9&p=9#p9


Eryone ThinkerV2 3d Printer
Note:
This section is for our beta plan users.
If your printer is thinker then don't upload it. This firmware is for thinker V2 3d printer


-------------------------------------------------------------------------------------------------------------------
-------------------------2019.9.10 Updated-------------------------------------------------------------------
Firmware for thinker V2 (Included the config for bltouch and NPN sensor)
The board:
Thinker 2560V2.jpg
Thinker 2560V2.jpg (288.35 KiB) Viewed 204 times
Marlin_thinkerV2.zip
(3.52 MiB) Downloaded 66 times

clemfarfar
Posts: 18
Joined: Wed Dec 04, 2019 10:45 pm

Re: Firmware For 3D Printer

Post by clemfarfar » Wed Dec 04, 2019 10:47 pm

hello, have you planned a marlin 2.0 or 2.1?

William
Site Admin
Posts: 31
Joined: Fri May 10, 2019 11:40 pm

Re: Firmware For 3D Printer

Post by William » Fri Dec 06, 2019 11:51 am

clemfarfar wrote:
Wed Dec 04, 2019 10:47 pm
hello, have you planned a marlin 2.0 or 2.1?
Hi, thanks for your suggest!
We've got the info of the official Marlin2.0 is released.
So we will try to update the firmware to Marlin2.0.
Because Marlin2.0 changed a lot in the framework then we need to do a lot test.
When we fixed the most bugs then we will release the beta version.
;)

clemfarfar
Posts: 18
Joined: Wed Dec 04, 2019 10:45 pm

Re: Firmware For 3D Printer

Post by clemfarfar » Sat Dec 07, 2019 2:00 am

thank's

be_st
Posts: 5
Joined: Thu Dec 12, 2019 12:09 am

Re: Firmware For 3D Printer

Post by be_st » Fri Dec 13, 2019 3:20 am

Hello,

so i have my new Thinker S 3D Printer. How can i check wich Version of Update i need?

Thanks Bernie
Eryone Thinker S

clemfarfar
Posts: 18
Joined: Wed Dec 04, 2019 10:45 pm

Re: Firmware For 3D Printer

Post by clemfarfar » Sat Dec 14, 2019 2:19 am

hello be_st

info print / info print ;) you check version ;) :lol: I speak little english :mrgreen:

be_st
Posts: 5
Joined: Thu Dec 12, 2019 12:09 am

Re: Firmware For 3D Printer

Post by be_st » Mon Dec 16, 2019 10:50 pm

Thank You Clemfarfar!

Do You know can i use the 2.0 Version for my printer Thinker S ?

Best Greetings from Germany

clemfarfar wrote:
Sat Dec 14, 2019 2:19 am
hello be_st

info print / info print ;) you check version ;) :lol: I speak little english :mrgreen:
Eryone Thinker S

clemfarfar
Posts: 18
Joined: Wed Dec 04, 2019 10:45 pm

Re: Firmware For 3D Printer

Post by clemfarfar » Wed Dec 18, 2019 3:32 am

not the forum V2, it does not work on our 3d printer, I tested and no screen they will release a 2.0 marlin but it needs to fix the bugs.

Post Reply