Pb bltouch. Help

Post Reply
Kouba
Posts: 1
Joined: Mon Dec 02, 2019 3:35 pm

Pb bltouch. Help

Post by Kouba » Mon Dec 02, 2019 5:40 pm

Hi.
the firmware does not work for the bltouch .. impossible to put a negative value on the z for the configuration.

Sorry for my english, i french.

User avatar
William
Site Admin
Posts: 111
Joined: Fri May 10, 2019 11:40 pm

Re: Pb bltouch. Help

Post by William » Tue Dec 03, 2019 3:16 pm

Hi, good day
Could you attach the details of it?
1) The bltouch version
2) Firmware link
3) The log file about the bltouch
We need to refer to these then we can get more details from it.
Cheers
## To be friendly and stay humble
- Pride and ignorance are eternal enemies
:)

newto3D
Posts: 3
Joined: Mon May 11, 2020 5:52 am

Re: Pb bltouch. Help

Post by newto3D » Tue May 19, 2020 3:31 am

You have to disable the soft bump stops on the printer, if you connect to the printer in S3D go to machine settings and run code M211 S0 you will get a reply that states the soft stops are disabled, you can then use negative value for the Z axis

Post Reply