[Fan duct modify] 5015 blower fan duct for thinker/thinker s

Post Reply
User avatar
Eryone
Site Admin
Posts: 29
Joined: Wed May 08, 2019 6:50 pm

[Fan duct modify] 5015 blower fan duct for thinker/thinker s

Post by Eryone » Mon Oct 14, 2019 11:51 am

Note:
1. You need to prepare these:
1) 5015 blower fan(50mm x 15mm)
2) Extension cable(2 pins)

If your 5015 blower fan cable is too short then you may need it.
length:1.5m

Well, maybe you don't need to buy the extension cable for it.
Just cut the stock blower fan cable and use the iron electric adapter to the new 5015 blower fan.
It can save money! Although you have spent most for the 5015 blower fan.

Download link:
5015 blower fan duct for thinker and thinker s.zip
(16.33 KiB) Downloaded 123 times
Enjoy it~
Blower fan_main.jpg
Blower fan_main.jpg (1.34 MiB) Viewed 3776 times
Blower fan_1.jpg
Blower fan_1.jpg (1.1 MiB) Viewed 3776 times
Blower fan_3.jpg
Blower fan_3.jpg (1.03 MiB) Viewed 3776 times
Blower fan_4.jpg
Blower fan_4.jpg (1.01 MiB) Viewed 3776 times

User avatar
William
Site Admin
Posts: 111
Joined: Fri May 10, 2019 11:40 pm

Re: [Fan duct modify] 5015 blower fan duct for thinker/thinker s

Post by William » Tue Oct 15, 2019 9:42 am

I've tested it and this is the result:
The old one is using the marble pla filament
The new one is using the glitter red pla filament
11.jpg
11.jpg (2.99 MiB) Viewed 3770 times
12.jpg
12.jpg (3.12 MiB) Viewed 3770 times
stl link:
https://www.thingiverse.com/thing:571949
by yeg3d

Gcode file created by S3D
uploads_15_3a_ba_88_29_deercraft.zip
(10.28 MiB) Downloaded 152 times
:D
## To be friendly and stay humble
- Pride and ignorance are eternal enemies
:)

Post Reply