Sensor nivel automatico Thinker SE

When you find your machine has problems. You can have a look at this section
Post Reply
viroma10
Posts: 3
Joined: Sun Nov 01, 2020 8:44 pm

Sensor nivel automatico Thinker SE

Post by viroma10 » Tue Dec 22, 2020 1:12 am

Hola a todos: Desearía me informarais de cual es el sensor de nivel para mi impresora Eryone Thinker SE (300x300x400)
1.1.9. Gracias por vuestra atención.

viroma10

User avatar
William
Site Admin
Posts: 248
Joined: Fri May 10, 2019 11:40 pm

Re: Sensor nivel automatico Thinker SE

Post by William » Wed Dec 23, 2020 8:52 am

Hi,
At first, could you type English instead of Spanish?
For the thinker SE printer, we suggest you use the Bltouch/3dtouch for it.
For the “Capacitive proximity switch”, it required more than 5V and it will work stably at 12V.
But the thinker se extend board can provide the 5V for the abl mode

Well, if you want to get the 24V from the motherboard
Warning: If you don't have the ability to finish these then skip it.
1) Upgrade the cooling fan to 24V then switch the motherboard fan output to 24V instead of 5V
2) Then you can use the sensor(The "+" and "-" pin should be connected to the 24V fan cable )
3) When you finished these, you can start to calibrate the sensor and enjoy it

Greeting
## To be friendly and stay humble
- Pride and ignorance are eternal enemies
:)

Post Reply