ER-20 Power Issue

When you find your machine has problems. You can have a look at this section
Post Reply
James
Posts: 1
Joined: Wed Nov 11, 2020 2:33 am

ER-20 Power Issue

Post by James » Wed Nov 11, 2020 2:37 am

Hello,

I have just unboxed and built my ER-20, have followed the video guide and when I switch the power on there is nothing on the LCD screen.

There is power going to the autoleveler, I can hear it and there is a red light.

Nothing at all on the LCD screen.

Can you help?

User avatar
William
Site Admin
Posts: 248
Joined: Fri May 10, 2019 11:40 pm

Re: ER-20 Power Issue

Post by William » Wed Nov 11, 2020 9:05 am

Hi, James.
It means the LCD cable is loose.
You can refer to this pic then correct it:
Also, you can print the LCD cable BUckle to tight it:
LCD Cable Buckle (1).zip
(6.27 KiB) Downloaded 46 times
Greeting
Attachments
LCD cable_ER20.png
LCD cable_ER20.png (342.05 KiB) Viewed 395 times
## To be friendly and stay humble
- Pride and ignorance are eternal enemies
:)

Post Reply