[FAQ Eryone 3D Printer] USB Drivers

When you find your machine has problems. You can have a look at this section
Post Reply
User avatar
Eryone
Site Admin
Posts: 29
Joined: Wed May 08, 2019 6:50 pm

[FAQ Eryone 3D Printer] USB Drivers

Post by Eryone » Mon Sep 16, 2019 11:10 am

USB Drivers
1. For windows user
CH34x_Install_Windows_v3_4.zip
(189.07 KiB) Downloaded 591 times
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
2. For Mac os user
Note: The Big sur version of the mac may blocked the drivers and you can refer to these to fix it:

How to turn off rootless/System Integrity Protection on Mac: Disable SIP
Turn off your Mac (Apple > Shut Down).
Hold down "Command+R" and "Press the Power button"
Wait for OS X to boot into the OS X Utilities window.
Choose Utilities > Terminal.
Enter "csrutil disable".
Enter "reboot".


If your mac os is Catalina version or later version, pls download this version:
CH341SER_MAC.ZIP
(148.49 KiB) Downloaded 38 times
------------------------------------------------------------------------------------------
The old version(When the new version doesn't work. Try to use this version)
CH34x_Install_MAC_10_9_AND_ABOVE_V1_3.zip
(174.13 KiB) Downloaded 306 times
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
3. For Linux user
CH341SER_LINUX.zip
(8.5 KiB) Downloaded 293 times
------------------------------------------------------------------------------------------
The guide of drivers install:
https://sparks.gogo.co.nz/ch340.html

Post Reply