Page 1 of 1

[FAQ Thinker] Leveling Your Heatbed

Posted: Mon Sep 16, 2019 11:06 am
by Eryone
Leveling Your Heatbed
1.Manual leveling
1)Ensure the distance between the nozzle and heatbed more than 5mm
If the nozzle hit the heatbed,you can refer to these steps:
Click LCD buttom>Prepare>Move Z axis

2)Click LCD buttom>Prepare>Auto home

3)There are two way to leveling your heated bed

The first one is: Click LCD buttom>Prepare>Disable the stepper>
Move the hotend to 4 corners of the heated bed with your hands

The second one is: Click LCD buttom>Prepare>Level bed
You can choose the way you like.

4)Adjust the knob of the heated bed

Check this pic to tuning your heated bed leveling
Level.jpg
Level.jpg (26.85 KiB) Viewed 4560 times

2.Auto-leveling
Note:
The default eryone thinker 3d printer doesn't inculded bltouch/Npn sensor.
If you want to use the auto-leveling, you need to purchase the bltouch/npn sensor.


Bltouch V3.1 with thinker series
(Thinker, Thinker S V1.0, Thinker S V1.1, Thinker S V1.2)
Tutorial video:
https://www.youtube.com/watch?v=fmzrUYbM1hQ&t=1s

Firmware:
Marlin1.1.9 for thinker bltouchv3.1.zip
(3.38 MiB) Downloaded 179 times
If you don't know how to upload the firmware to your printer, please refer to this link:
https://www.youtube.com/watch?v=fRwVBV3nGhI

Bltouch V3.1 mount plate stl file:
Eryone thinker bltouchV3.1 plate.zip
(10.17 KiB) Downloaded 198 times