1.Manual leveling
1)Ensure the distance between the nozzle and heated bed more than 5mm
If the nozzle hit the heated bed, you can refer to these steps:
Click LCD buttom>Prepare>Move Z-axis
2)Click LCD buttom>Prepare>Auto home
3)There are two way to leveling your heated bed
The first one is: Click LCD buttom>Prepare>Disable the stepper>
Move the hotend to 4 corners of the heated bed with your hands
The second one is: Click LCD buttom>Prepare>Level bed
You can choose the way you like.
4)Adjust the knob of the heated bed
Check this pic to tuning your heated bed leveling
- Level.jpg (26.85 KiB) Viewed 5928 times
2.Auto-leveling
Note:
1. The default eryone thinker 3d printer doesn't inculded bltouch/Npn sensor.
If you want to use the auto-leveling, you need to purchase the bltouch/npn sensor.
2. Recommend the thinker se user use the bltouch/3dtouch as the abl sensor
Bltouch V3.1 with thinker series
(Thinker V1 | Thinker V2(Thinker S2.0/2.0 and thinker SE))
Tutorial guide:
viewtopic.php?f=8&t=224
Firmware:
Update: New firmware for the Thinker V1 | Thinker V2(Thinker S2.0/2.0 and thinker SE) 2020/9/18
viewtopic.php?f=6&t=5
If you don't know how to upload the firmware to your printer, please refer to this link:
https://www.youtube.com/watch?v=b2D4I9Yxejw&t=20s
Bltouch V3.1 mount plate stl file:
Thinker V2(Thinker S2.0/2.0 and thinker SE)
https://www.thingiverse.com/thing:4585251
Thinker V1：