mintemp error

When you find your machine has problems. You can have a look at this section
Post Reply
leisa01
Posts: 1
Joined: Sat Jan 09, 2021 8:52 am

mintemp error

Post by leisa01 » Fri Mar 26, 2021 1:13 am

My thinker s is giving me a mintemp error. I have changed the hot end but it is still happening. Can anyone give me suggestions as to why this is happening? Thanks

User avatar
William
Site Admin
Posts: 248
Joined: Fri May 10, 2019 11:40 pm

Re: mintemp error

Post by William » Fri Mar 26, 2021 6:17 pm

Hi,
If you have the multimeter. Then you can measure the port at first.
1. If the port can supply 5V then it means it works
2. If the port can't supply 5V/3.3V then the port should have some issue.

For the 2nd point, you can use the spare temp sensor port for it(E1)
Refer to it:
viewtopic.php?f=17&t=219
## To be friendly and stay humble
- Pride and ignorance are eternal enemies
:)

Post Reply