Need Help. Eryone TPU TransBlue Filament

You can find the user guide here!
Post Reply
be_st
Posts: 5
Joined: Thu Dec 12, 2019 12:09 am

Need Help. Eryone TPU TransBlue Filament

Post by be_st » Mon Dec 16, 2019 4:59 pm

Hello, iam a beginner with 3D print. And my new printer Thinker S does not work with this fillament. The TPU is so soft it makes always a loop bevor it goes in the hole. I have a photo atached. Sorry my englisch ist easy..

Thank You

Bernie from Germany
Attachments
2019-12-16 09-54-05-5.jpg
2019-12-16 09-54-05-5.jpg (1.59 MiB) Viewed 3889 times
2019-12-16 09-54-05-6.jpg
2019-12-16 09-54-05-6.jpg (1.5 MiB) Viewed 3889 times
Eryone Thinker S

User avatar
kaktus
Site Admin
Posts: 18
Joined: Sat Jun 01, 2019 3:58 pm

Re: Need Help. Eryone TPU TransBlue Filament

Post by kaktus » Wed Dec 18, 2019 10:50 pm

Hello.
:mrgreen:

Use the lever to reduce the pressure of the roller. Then move the filament with your hand into the mechanism until its end is at the beginning of the PTFE tube.
:P

clemfarfar
Posts: 18
Joined: Wed Dec 04, 2019 10:45 pm

Re: Need Help. Eryone TPU TransBlue Filament

Post by clemfarfar » Thu Dec 19, 2019 9:31 pm

you have to lower the flow to 75% which will make your filament less compressed, you will have more of your loop problem

be_st
Posts: 5
Joined: Thu Dec 12, 2019 12:09 am

Re: Need Help. Eryone TPU TransBlue Filament

Post by be_st » Sun Dec 22, 2019 7:14 pm

I made this in the foto. so the fillament has no change to go in loop or anyway. :)

Tank You All!
Attachments
IMG_4372.jpg
IMG_4372.jpg (1.11 MiB) Viewed 3870 times
Eryone Thinker S

clemfarfar
Posts: 18
Joined: Wed Dec 04, 2019 10:45 pm

Re: Need Help. Eryone TPU TransBlue Filament

Post by clemfarfar » Mon Dec 23, 2019 1:47 am

clement ptu.zip
(751 Bytes) Downloaded 175 times
MY profil cura

have you tried to reduce your flow on your machine? I have no problem on my side with the tpu, knowing that I no longer have the ptfe

User avatar
Eryone
Site Admin
Posts: 29
Joined: Wed May 08, 2019 6:50 pm

Re: Need Help. Eryone TPU TransBlue Filament

Post by Eryone » Wed Dec 25, 2019 2:14 pm

:D Merry Christmas, all

Post Reply