Page 1 of 1

[Nozzle] Nozzle infomation of Thinker

Posted: Wed Sep 25, 2019 2:55 pm
by William
Here is the information you can refer to :
1. If you want to add the heater block socks then this pic will be helpful
heater block.png
heater block.png (179.36 KiB) Viewed 5739 times
2. If you want to replace the old nozzle of thinker/thinker S then refer to this pic:
喷嘴内部设计_2.png (110.41 KiB) Viewed 5739 times
Hope you have a nice day!