Upgrade Thinker S or ER20 Extruder / Hotend to E3D V6 / BMG Direct Drive / BLTouch

Introduce yourself to us and other members here, or share your own product reviews, suggestions, and tips and tricks of using Eryone products.
Post Reply
makidoja
Posts: 2
Joined: Fri Jan 08, 2021 6:37 am

Upgrade Thinker S or ER20 Extruder / Hotend to E3D V6 / BMG Direct Drive / BLTouch

Post by makidoja » Mon Feb 15, 2021 6:54 pm

This is a very compact and lightweight direct drive modification for the Eryone Thinker S / Thinker SE / ER20 Printer

Changes:
Included a Bowden version
It is necessary to use a 22mm E motor (pancake) for Direct Drive.

Offsets nozzle:
X: +32mm
Y: -2mm

I recommend printing the whole mod on PLA and the Fan Duct on PETG.

Required for Direct Drive version:-
E3D V6 Hot End (Reuse Eryone Heater Block, Thermocouple and Heater Cartridge)
BGM (Clone) Extruder
TwoTrees 12mm Pancake Z Stepper Motor
5015 Cooling Fan
4010 Hot End Fan

Required for Bowden version:-
E3D V6 Hot End (Reuse Eryone Heater Block, Thermocouple and Heater Cartridge)
5015 Cooling Fan
4010 Hot End Fan

Optional:-
Cable Sock

https://www.thingiverse.com/thing:4727969
Attachments
20210214_134358.jpg
20210214_134358.jpg (1.27 MiB) Viewed 126 times

User avatar
William
Site Admin
Posts: 237
Joined: Fri May 10, 2019 11:40 pm

Re: Upgrade Thinker S or ER20 Extruder / Hotend to E3D V6 / BMG Direct Drive / BLTouch

Post by William » Fri Feb 19, 2021 11:50 pm

Thats cool.
Thanks for the sharing!
## To be friendly and stay humble
- Pride and ignorance are eternal enemies
:)

Post Reply