STL/STP file forcomplete hot end assembly?

Post Reply
porter81
Posts: 3
Joined: Mon Jan 25, 2021 9:06 am

STL/STP file forcomplete hot end assembly?

Post by porter81 » Thu Feb 25, 2021 6:44 am

I found the STL file for the carriage and the hot end case on these forums which I've "assembled" on Fusion 360, all I'm missing is a STL or STP file for the nozzle, this part:
viewtopic.php?f=23&t=182

Is there a file available for the nozzle?

Or, is there a file for the complete hot end assembly?

Trying to make an adapter for an aftermarket direct drive extruder...

Thanks.

User avatar
William
Site Admin
Posts: 248
Joined: Fri May 10, 2019 11:40 pm

Re: STL/STP file forcomplete hot end assembly?

Post by William » Thu Feb 25, 2021 10:52 am

Hi,
The nozzle is the same as the e3dv6 type one.
You can search Google then found the stl file for it.
eg:
https://grabcad.com/library/e3d-v6-nozzle-0-4mm-1

Greeting
## To be friendly and stay humble
- Pride and ignorance are eternal enemies
:)

porter81
Posts: 3
Joined: Mon Jan 25, 2021 9:06 am

Re: STL/STP file forcomplete hot end assembly?

Post by porter81 » Fri Feb 26, 2021 7:09 pm

Sorry, I didn't explain myself well enough, I'm looking for a file for the whole hot end assembly - The part that's inside the cover, which the nozzle screws into.

Is it the same dimensions as a creality hot end?

User avatar
William
Site Admin
Posts: 248
Joined: Fri May 10, 2019 11:40 pm

Re: STL/STP file forcomplete hot end assembly?

Post by William » Sat Feb 27, 2021 11:57 am

porter81 wrote:
Fri Feb 26, 2021 7:09 pm
Sorry, I didn't explain myself well enough, I'm looking for a file for the whole hot end assembly - The part that's inside the cover, which the nozzle screws into.

Is it the same dimensions as a creality hot end?
I have upload the stp file to here, you can have a look
viewtopic.php?f=28&t=420&p=997#p997
## To be friendly and stay humble
- Pride and ignorance are eternal enemies
:)

porter81
Posts: 3
Joined: Mon Jan 25, 2021 9:06 am

Re: STL/STP file forcomplete hot end assembly?

Post by porter81 » Sat Feb 27, 2021 11:04 pm

YES!
That's exactly what I needed, thanks William!

Post Reply