Eryone Maflex Magnetic Flexible Steel Plate with Sticker 220x220mm Clear PEI

Price: $ 40

Hightlights

Highlights:



  • Eryone Magnetic Flexible Heated Bed is compatible with Creality CR-10S, JG Aurora A5 and A5x, Geeetech A30, Folger FT-5, Tevo Black Widow and Tornado, Anet E12, TronXY X3s and X5SA, , Alfawise U20, Wanhao Duplicator 9, RAISCUBE T8 Lulzbot Taz 6, Hictop CR-10 and more 3D printer

  • No more tape, no more glue, no more shovel, and release your printing anxiety

  • Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off

  • How to clean? Please clean the dust with a soft cloth. Wipe the stains with over 95% strength alcohol gently.

  • Note: Do not wash or clean the PEI with any water, strong chemical reagents or strong detergents.
  • Specs

    Upgrade 3D Printer Platform kits
    Eryone Maflex Magnetic Flexible Heated Bed with Sticker For 3D Printer 310*310mm 235*235mm 220*220mm

    How to clean?
    Please clean the dust with a soft cloth. Wipe the stains with over 95% strength alcohol gently.

    Warning:
    Do not wash or clean the PEI with any water, strong chemical reagents or strong detergents.
    Please don??t use hair spray.

    Why do not adhere PEI surface when printing?
    1)Please check PEI if it is damaged; if damaged, can not adhere;
    2)If it is not damaged, please adjust bed temp when printing. If too cool on the PEI surface, can not adhere.

    Have any trouble with printing?

    The prints does not stick on your printing surface?

    The print is perfect, but is damaged when take off platform?

    Eryone Maflex magnetic flexible heated bed surface is the best solution for you.

    Compatible with
    Creality CR-10S, JG Aurora A5 and A5x, Geeetech A30, Folger FT-5, Tevo Black Widow and Tornado, Anet E12, TronXY X3s and X5SA,
    Alfawise U20, Wanhao Duplicator 9, RAISCUBE T8 Lulzbot Taz 6, Hictop CR-10
    and more 3D printer

    Currently we have many sizes of this kind of printing surface, if you need other size, please feel free to contact us.
    310*310mm
    235*235mm
    220*220mm

    Maflex is made from high quality spring steel that won't kink or warp when you flex them, they just return back to shape!

    Our magnets and films have all been formulated to resist over 108℃ / 226℉ so you can heat your bed to high temps for specialty filaments and not worry about loss of performance.

    Simply remove the hot bed Plate from the hot bed Plate Magnetic Base on your 3D printer when the print is finished and flex slightly to pop your print right off!

    Thank you!     

    FAQ

    Download