Thinker S 3D Printer
We choose TMC2208 as stepper motor driver and quite fans but powerful which dramatically decreases the noise and improve the printing quality as well.
The average operational noise is 49dBA, enjoy your coffee aside the 3D printer is not only a dream.
Assembly finished within 15 minutes:
The base and gantry of this 3D printer have been pre-assembled, what you need to do is put those two parts together
and wire a few interfaces.
Large volume and high quality:
The printing volume is 300*300*400mm, with carefully-selected components. After 3 steps assembly, the printer can
print pretty well, almost no need to calibrate.
Power failure resume feature:
Built-in supercapacitor and circuit designing, the mainboard will store the height value of Z-axis when the power off.
When the power system resume, the printer can resume the print.
Compatible with Auto-leveling sensors:
With pre-designed interface for BL-touch and proximity switch, update Eryone Thinker S firmware to
enable the auto-leveling function is easily.
Printer and printing properties
Print technology: Fused
Build volume: 300x300x400mm
Print precision: 0.05mm
X, Y, Z accuracy: 12.5 μm / 12.5μm / 2.5μm
Filament diameter: 1.75mm
Default nozzle diameter: 0.4mm
Filament support: PLA, PETG, TPU，etc
Average operating sound:~49dBA
software support: Cura, Simpfily3D, Pursa
slic3r, Repetier-host, etc
Print file type: *.GCO, *.GCODE
Supported OS: WIN/MAC/Linux
Firmware type: Marlin(Open Source)
File transfer: USB print/Stand-alone SD card print
ElectricalPower supply unit input: 100V~120V,3.6A/200V~230V,2A 50~60HZ
Shipping dimension: 670x550x240mm
Nett weight: 9.4kg
Shipping weight: 14kg
max temperature: 250℃/482℉
Heated bed max temperature: 100℃/210℉
Nozzle heating time(25~180℃/77~356℉)：~1min
Heated bed heating time(25~60℃/77~140℉)：3min
Operating environment: 10~32℃/50~89.6℉
Non-operating environment: 0~32℃/32~89.6℉